Roller Shutter with Lighting Glazing Profile, dimensions 65mm x 120mm. A profile that can be added to a steel roller shutter for lighting and visual contact.

KATEE’s Steel Roller Shutters are manufactured to the most stringent strength and
safety specifications and provide a reliable solution for residential, commercial, and
industrial use. They offer top-level security and strength, attributed to the 5 ribs on
each sheet.

They consist of galvanized steel sheets, connected together in an interlocking
pattern. They are installed in openings up to 6.00 meters wide and 6.00 meters high. The sheet thickness is proportionate to the shutter width (0.8mm or 1mm), and the
sheet development is 12.5cm. They are wound on a reinforced galvanized shaft and
rotate on industrial-grade spring boxes with PVC bearings for noise minimization or
on a TUBE rotating on bearings, depending on the shutter dimensions. The sheets have special parallel corrugations for extra strength, while every other profile strip
has special plastic end caps at both ends, which prevent lateral displacement of the
profile and act as gliders within the shutter’s side guides (channels). This eliminates the need for greasing the guides. A special anti-burglary bottom sheet with a
thickness of 1.5 mm is installed at the bottom of the shutter for additional security
and profile reinforcement. The option to install a safety bar for protection in cases of
high wind pressure is also provided.

The shutters move within industrial channels, 7 cm deep, with special double rubber
seals (inside and outside) that glide and seal. Additionally, a special soft elastic
bottom seal profile (bubble) is installed at the bottom, which compensates for any
ground irregularities and acts as a cushion compressed by the shutter’s weight for
better operation and sealing. The shaft can be ⌀60 or ⌀76, depending on the shutter
dimensions. Furthermore, the hangers (brackets) supporting the shaft are adjustable,
manufactured by KATEE, as are all other small components (handles, end stops,
hooks, etc.). Also, all shutter components are galvanized. The steel undergoes special
pre-treatment (degreasing and phosphating), and then the shutters are
electrostatically painted in special ovens with polyester paint of any color upon
customer request. On the flat roller shutter, various perforations (honeycomb or
square pattern) can be made upon customer request, providing light and ventilation
to the space. Special glazing panels measuring 12cm x 6cm can also be installed to
provide visual contact.

The shutters operate manually with locks or with an electric mechanism which is
quiet, of high EU specifications, with an electric brake and manual operation in case
of a power outage You can see the shutter unlocking process by clicking here.

They are also offered with remote control featuring a state-of-the-art, non-copyable
rolling code transmitter Operation via button or keyed button is also possible, as well
as shutter operation from a mobile phone via Smart Wi-Fi.